LOBA PrimaSeal Plus – Alcohol-Based Primer for Wooden Floors LOBA PrimaSeal Plus is an alcohol-based primer for wooden floors, designed to provide a safe, reliable basecoat before applying LOBA water-based finishes. It offers excellent blocking of wood ingredients and old contamination, helps to intensify the natural colour of the wood and delivers a very good price/performance ratio. The primer is suitable for virtually all types of European and exotic timber and is specifically formulated to reduce the side-bonding effect of water-based finishes. When used on properly laid and bonded parquet or wooden flooring, no block bonding occurs. Key Features Alcohol-based primer for wooden floors Easy and safe application with professional tools Excellent blocking of wood ingredients and old contamination Intensifies the colour and character of the wood Reduces the side-bonding effect of water-based finishes No block bonding on correctly installed parquet and wood floors Good price/performance ratio Suitable for almost all European and exotic timber species Range of Use Suitable for virtually all types of European and exotic timber. For special or unknown wood species, refer to the LOBA wood types list at loba.de or consult LOBA technical support. System Recommendations – Suitable Finishes Normal traffic: LOBA Life Up to heavy traffic: LOBA EasyFinish, LOBA Viva Up to very heavy traffic: LOBA 2K Supra A.T., LOBA 2K Duo, LOBA 2K Fusion Application Instructions (Parquet and Wooden Flooring) Professionally sand the surface. The floor must be dry and free from old coatings, oil, grease, wax, silicone, sanding dust and other impurities. Ensure correct climate conditions: room temperature approx. 15°C to 25°C, floor temperature 15°C to 22°C, relative humidity 40–75%, max. wood moisture 12%. Provide sufficient ventilation. Transfer the material into a LOBA varnish bucket and stir well before use. Apply the primer generously and evenly using a LOBA Roller Universal 100. Application rate: approx. 100–120 ml/m² (8–10 m² per litre). Do not intermediate-sand the primer. Allow to dry. Then apply the selected LOBA water-based finish according to its technical information. Thinner / Mixing The product is ready to use and must not be diluted. Drying Time* Do not overcoat before approx. 60 minutes have elapsed. In case of delayed drying (low temperature, high humidity, poor ventilation), wait until the surface is completely dry before overcoating. *All drying times refer to approx. 20°C and 50% relative humidity with sufficient, draught-free ventilation. Technical Data ProductLOBA PrimaSeal PlusTypeAlcohol-based primer for wooden floorsApplication rate100–120 ml/m² (8–10 m²/L)ThinningReady to use – do not thinIntermediate sandingNot required – do not intermediate-sandDrying to overcoatApprox. 60 minutes (at 20°C / 50% RH)StorageApprox. 18 months in unopened original containerFrost resistanceNot sensitive to frostGISCODEG1Article no. / Size11033 – 5 LSKUUFSLOBAPRIMAPLUS General Guidelines & Safety Notes Clean tools immediately after use with suitable solvents (e.g. brush cleaner). Ensure good ventilation during application and drying. Observe all relevant occupational health and safety regulations. Protect solvent-sensitive items (e.g. plants, aquariums) from vapours. Keep away from open flames, sparks and sources of ignition during application and drying. Important Note Always observe the current LOBA Technical Information and carry out a test area on site, especially on unknown or sensitive wood species, to confirm compatibility and final appearance.
