LOBA 2K Invisible – 2-Component Waterborne Lacquer LOBA 2K Invisible is a two-component waterborne polyurethane lacquer developed to preserve the natural look and feel of untreated wood. With its ultra-matt, nearly invisible finish, it maintains the raw appearance of the surface while providing maximum protection against scratches, chemicals and daily wear. Ideal for modern residential and commercial interiors where a natural aesthetic is desired. Key Features Ultra-matt finish – preserves the raw look of untreated wood 2-component waterborne polyurethane lacquer Exceptional resistance to scratches, scuffs and chemicals Non-yellowing, crystal-clear protection Fast drying – 4–6 hours between coats Low odour, low VOC, environmentally responsible Recommended Uses Residential interiors with a natural design concept Commercial spaces where aesthetics and durability are both required Wooden floors that should look untreated while being fully protected Application Instructions Shake lacquer thoroughly before use. Mix with LOBA hardener in a 10:1 ratio. Apply evenly with a roller in thin coats. Allow approx. 4–6 hours drying time between coats. Apply 2–3 coats depending on the traffic level. Full cure in 5–7 days. Technical Data Base2-component waterborne polyurethane lacquer FinishUltra Matt (invisible look) Mixing ratio10:1 (lacquer : hardener) Pot lifeApprox. 2 hours Drying time4–6 hours between coats Full cure5–7 days Container size5L hardener VOCLow SKUUFS-LOBA-2K-INVISIBLE Health & Safety Apply in well-ventilated areas. Avoid contact with skin and eyes; wear protective gloves. Refer to Safety Data Sheet before use. FAQs What makes LOBA 2K Invisible unique? It preserves the natural, raw look of untreated wood while offering maximum protection. Do I need to mix it with a hardener? Yes, it is a two-component lacquer mixed at 10:1 with hardener. What is the sheen level? Ultra-matt, designed to be nearly invisible on the floor.
